Corporate Mailing Address:
11445 E. Via Linda,
Suite 2-322, Scottsdale, AZ 85259
Warehouse Address:
268 Martin Luther Avenue
Morristown, NJ 07960
Sold Out!
Out of stock
Perfectly sized to complete any extra undercounter space
Make the best use of space by installing your appliance under the counter
Sized at 32 1/4" high to fit under most lower ADA compliant counters
Meets UL-471 commercial standards
Leveling legs can be adjusted to raise the height up to 34.25" for an appropriate fit under standard counters
Provides a full display of your stored collection with a heat-safe double tempered design
Electronic controls for precise temperature management
Interior can hold up to 7 Bordeaux style bottles. Most wider Burgundy style bottles fit as well
The floor slight is slightly angled, allowing you store bottles that have been uncorked at a gentle tilt
Temperature readout can be shown in Celsius or Fahrenheit
Provides an attractive and efficient bottle display
Reduced maintenance and steady temperature performance
Interior fan helps to ensure the temperature is evenly distributed
Stainless steel look for added elegance
User-reversible door swing allows you to easily adjust to better accommodate your setting
Audible alarm will sound if the door is left ajar for over 60 seconds
If the interior temperature becomes too warm, an audible alarm will sound and the temperature display will flash until the proper temperature is restored
Optional setting lets you disable the lighting and alarm for up to 48 hours
Unit will retain last temperature settings in the event of a power failure
Flat design offers added space savings by requiring no extra depth to plug the unit in
Space saving design with easier cleanability
Includes an extra kickplate to cover up the leveling legs if the unit's height is raised
Runs at under 34 dB for a quiet performance in any setting
Compressor-based operation to ensure reliable temperature performance
Environmentally friendly design with no ozone-damaging chemicals
Eco-friendly hydrocarbon-based refrigerant for a greener footprint that meets current CARB regulations
Our skilled craftsmen carefully remove and catalog each kitchen component, ensuring maximum material recovery and minimal waste during the extraction process.
We've developed regional, sustainable packaging routes to minimize the carbon footprint of transporting kitchens to our stores.
We actively educate designers, architects and homeowners about the environmental benefits of kitchen reuse through workshops and community engagement.
"We were planning to spend $350,000 on a new kitchen until we discovered Aurora. Our Poggenphol kitchen not only saved us $100,000 but also prevented over 8,000 lbs of CO2 emissions. The quality is impeccable—you'd never know it wasn't custom-designed for our space."— Tim Anderson, Greenwich, CT
The molding and trim shown in our listing photos are rarely fully reclaimable. Because salvaging is a delicate process, you should expect to receive less than what is pictured.
Most retrofits will require you to source additional matching material to complete your project. Additionally, salvaged trim is not "plug-and-play"—plan on repairing, patching, and repainting these pieces to get them installation-ready. We'd rather you prepare for a project than be surprised by a shortage on delivery day.
Most wall finishes or paneling surrounding the cabinetry is not included. If you are interested or expecting a certain example ask your sales associate.
Countertops shown in our listings are provided as a complimentary inclusion only and are not guaranteed as part of the sale. Due to the high risk of cracking or breaking during disassembly and transport, countertops may not be available or usable at the time of delivery.
Please note that no claims, credits, or refunds will be issued if countertops are damaged or unavailable. Additionally, backsplash tile, wall stone, and related materials are never included in the purchase price. We strongly recommend planning your project with new countertops in mind; if the originals arrive intact, consider it a win.
Please be aware that both showroom and pre-owned cabinetry will have pre-existing cut-outs. These openings for electrical, plumbing, and gas connections are commonly found on the backs, sides, and toe kicks of the units.
These cut-outs are a standard part of any previously installed kitchen and should be expected. Because every home's utility layout is different, you should plan for additional modifications or patching to accommodate your specific plumbing and electrical needs during re-installation.
If a kitchen was custom-painted on-site, you must plan for a full repaint. Because these kitchens were painted over the joints after installation, the paint film is broken during the disassembly process. To achieve a finished look, these cabinets must be repainted in place once re-installed, exactly as they were during the original installation.
For all other pre-owned kitchens, please expect that touch-up painting and color matching will be required. We recommend budgeting for these finishing touches to ensure a seamless result in your new space.
Manufacturer accessories, specialized mounting hardware, and decorative trim kits shown in listing photos are not guaranteed to be included. While these components are often part of a showroom display, they are frequently fitted to that specific installation and may not be available once the unit is removed.
Additionally, internal appliance accessories—such as milk containers, water pitchers, and specialized shelving—are often not included in the sale. You should plan to source these specific manufacturer parts or trim kits to fit your new layout. If you have questions about whether a specific component is included, please reach out to us before purchasing.
Pre-owned appliances included in kitchen sets are maintained only to the previous homeowner's standards. These products are sold based on the homeowner's representation of condition; Aurora does not independently test these units. You should budget for a professional service call upon installation, as repairs or maintenance may be necessary. Showroom displays may also require service calls to ensure they are fully operational in a home setting. All appliances in these sets are discounted significantly to accommodate these potential service requirements.
Warranties are only included on stand-alone products explicitly labeled as "Certified." For all other stand-alone units, Aurora offers a 30-day functional guarantee should the product require service or repair.
Please note that these products are sold based on our vendor's representation of condition. Aurora does not independently test these units. We recommend all customers plan for a professional inspection and service to ensure the appliance meets their needs.
All kitchen components are sold strictly "as-is" regarding their configuration and fit. Please be aware that in showroom displays, components like sinks, cooktops, and appliances may be fitted into custom-cut openings that do not follow standard residential sizing.
It is the buyer's responsibility to verify that all components—including sinks and integrated appliances—properly fit the cabinetry provided. Aurora does not guarantee that showroom configurations are compatible with standard plumbing or electrical requirements. You should expect to make modifications, cabinet adjustments, or source new components to ensure a proper fit in your specific installation.
Post-removal Condition: view here
Our project consultations are built for the thoughtful homeowner who has found a luxury interior element they love — or needs help sourcing the perfect fit — and wants clear insight on how it will integrate seamlessly into their unique floor plan.